Reasons Your Water Heater Isn't Functioning

This Page

What are your opinions on No Hot Water — Water Heater Repair?


Hot Water Heater Repair
Numerous contemporary residences make use of an electric water heater for their heater, as a result of its convenience as well as convenience of use. Nonetheless, just like any other electrical home appliances, troubles might arise with its usage, suddenly. It can be truly aggravating to get up to a chilly shower as opposed to a warm one or having your bath with water that isn't hot sufficient and even also warm. Whatever the instance may be, water heater problems can be rather stressful. Luckily, we have actually made a checklist of feasible remedies to your water heater issues. There are a number of elements that might trigger a number of these issues, it could be a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for safety and security. Whatever the trouble is, getting it dealt with need to not posture way too much of a concern if you adhere to these actions:

Examine Your Power Supply:


As standard as this might appear, it is really needed. Without ample power, your water heater will not work. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Check if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, simply transform it on and off once more. Change any type of damaged or worn-out fuse. Test the appliance with power after these adjustments to see if it's currently functioning.

Inspect the Heating Element in the Hot Water Heater:


If it's not a power trouble, then try checking out your burner if it is still working. Evaluate each of your heating elements to be sure the trouble isn't with any one of them. If any of them is defective, change that component and after that inspect whether the hot water is back on.

Examine Your Thermostat:


If your hot water heater still isn't working or the water coming out isn't warm sufficient, you may require to examine the temperature settings on your top thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the access panel and also press the red switch for temperature reset over the thermostat. This must assist heat the water. Transform the circuit breaker back on and examine if the issue has been settled.

Call An Expert:


If after replacing all damaged parts and resetting your temperature level, the water heater still isn't functioning, you might need to speak to a professional plumber for a professional point of view. The problem with your heating system could be that the cold and hot taps have actually been switched or it might be undersized for the amount of warm water needed in your house. Whatever the situation may be, an expert plumber would aid resolve the trouble.

Final thought


Hot water heater issues are not constantly major. Most of them are because of small problems like a blown fuse or damaged heating element. Changing the damaged parts need to work. Nonetheless, if you are still not able to address the problem, give a call to your local plumber to come to get it taken care of.

Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/


No Hot Water — Water Heater Repair

I was made aware of that article on How to Troubleshoot and Repair an Electric Water Heater through a good friend on another web page. Sharing is good. Helping people is fun. Thank-you for going through it.




Click For More Information

Leave a Reply

Your email address will not be published. Required fields are marked *